Sonex Labs

Voice cloning · Hindi

Free Hindi voice clone

Record about 10 seconds of your voice and make a free Hindi AI voice clone. Type a Hindi or Hinglish script and it reads it in your voice. The same clone speaks English and every other language Pāṇini supports, with your own accent.

Clone your voice freeHear one voice in seven languages

Free

One voice clone with every free account, no card

10 s

Of your voice is enough to make the clone

Every language

Pāṇini supports, read in your voice and your accent

Hear it

One voice reading the same line in seven languages

These clips are Diya, a Sonex platform voice recorded in Indian English, not a customer clone. Each one says “Thanks for watching. If this video helped, send it to someone who needs it.” Listen for the accent: it stays Diya’s in every language. A clone of your voice works the same way and keeps your accent.

  • English

    Thanks for watching. If this video helped, send it to someone who needs it.

    Diya, a Sonex platform voice, not a customer clone · 4.7 s

  • Hindi

    वीडियो देखने के लिए शुक्रिया। अगर ये काम का लगा, तो जिसे इसकी ज़रूरत है, उसे ज़रूर भेजिए।

    Diya, a Sonex platform voice, not a customer clone · 6.4 s

  • Bangla

    ভিডিওটা দেখার জন্য ধন্যবাদ। কাজে লাগলে, যার দরকার তাকে অবশ্যই পাঠিয়ে দিন।

    Diya, a Sonex platform voice, not a customer clone · 6.0 s

  • Tamil

    வீடியோவைப் பார்த்ததுக்கு நன்றி. இது உதவியா இருந்தா, தேவைப்படுறவங்களுக்கு கண்டிப்பா அனுப்புங்க.

    Diya, a Sonex platform voice, not a customer clone · 7.1 s

  • Telugu

    వీడియో చూసినందుకు ధన్యవాదాలు. ఇది ఉపయోగపడితే, అవసరం ఉన్నవాళ్లకి తప్పకుండా పంపండి.

    Diya, a Sonex platform voice, not a customer clone · 6.5 s

  • Arabic

    شكرًا على المشاهدة. إذا استفدتم من هذا الفيديو، أرسلوه لمن يحتاجه.

    Diya, a Sonex platform voice, not a customer clone · 6.1 s

  • Urdu

    ویڈیو دیکھنے کا شکریہ۔ اگر یہ کام کی لگی، تو جسے اس کی ضرورت ہے، اُسے ضرور بھیجیں۔

    Diya, a Sonex platform voice, not a customer clone · 7.4 s

A Sonex platform voice, not a customer clone. The lines were typed, not recorded: the same voice read each script as text. Why the accent carries over.

Every language

How a Hindi voice clone works

Most Hindi videos are not pure Hindi. The intro slips into English, product names stay in English, and the punchline lands in Hinglish. A clone reads all of it in one voice, because Pāṇini reads mixed-language text such as Hinglish naturally.

You can record the sample in Hindi, in English or in a mix. The clone is not tied to that language: each line is read in the language of the text you type. What it keeps is you, your voice and your accent, whether that is Delhi, Indore or Patna.

Step by step

How to clone your voice

These are the steps in the Sonex dashboard today. It takes a few minutes, most of it recording.

  1. 1

    Create a free account

    Sign up free. No card is needed, and the account comes with one voice clone and 10,000 text-to-speech characters to use with it.

  2. 2

    Record about 10 seconds

    Use your phone's voice recorder or any microphone. Talk naturally for 10 to 30 seconds in a quiet room, with no music behind you. Any language works.

  3. 3

    Add the voice

    In the dashboard, open Voices and choose Add voice. Give the voice a name and choose your recording (WAV, MP3, OGG or M4A). Typing what you said into the Transcript box is optional, and it improves the clone.

  4. 4

    Confirm consent

    Tick the box to confirm the recording is your own voice, or that the speaker has given you explicit permission, then choose Agree and create voice.

  5. 5

    Use it straight away

    The clone appears in My voices as soon as it is created. Choose it under Models, Text-to-Speech (or for a voice agent), type a Hindi script and play it.

  6. Create your free account

What you need

  • A quiet room

    Background noise, music and echo end up in the clone. A small room with soft furnishings is better than a large empty one.

  • About 10 seconds of you

    10 seconds is enough; the dashboard takes 10 to 30. One speaker only, talking the way you talk on camera.

  • A phone is fine

    Any phone's voice recorder works. Hold it a hand's width from your mouth and keep it still.

  • What you said, typed out

    Optional. The Transcript box takes the words in your sample and gives a better clone.

Better results

Writing Hindi scripts for your clone

  • Devanagari or Roman, your choice. Type Hindi in Devanagari or in Roman Hinglish, or mix the two. Write English words the way your audience says them, and play the line before you publish.
  • Commas are pauses. Keep sentences short and put a comma where you would take a breath. The clone follows punctuation, so a comma gives a small pause and a full stop a longer one.
  • Write numbers the way they are said. Prices and dates are where a reading most often goes wrong. If ₹1,499 or 15/08 sounds off, write it in words (पंद्रह अगस्त) and play it again.

Hinglish mein

Voice clone kaise kare

Free mein apni awaaz ka AI voice clone banane ke liye bas 10 second ki recording chahiye. Clone mein aapka accent bhi rahega.

  1. 1sonexlabs.com par free account banaiye. Card ki zarurat nahi.
  2. 2Phone ke voice recorder mein 10 se 30 second apni awaaz record kijiye. Shaant jagah, ek hi awaaz, peeche koi music nahi.
  3. 3Dashboard mein Voices kholiye aur Add voice dabaiye. Voice ka naam likhiye aur recording chuniye. Jo bola hai woh Transcript mein likh dijiye: zaroori nahi, par clone behtar banta hai.
  4. 4Consent wala box tick kijiye aur Agree and create voice dabaiye. Sirf apni awaaz, ya jiski awaaz hai uski permission ke saath.
  5. 5Clone turant My voices mein aa jaata hai. Models, Text-to-Speech mein use chuniye, Hindi, Hinglish ya English script type kijiye aur play kijiye.

Next

Put your Hindi clone to work

Voice cloning in other languages: Bengali, Urdu, Arabic, Tamil, Telugu, or every language.

FAQ

Hindi voice cloning questions

Yes. A Sonex voice clone is not tied to the language it was recorded in. Type a Hindi script and your clone reads it in your own voice, with Hindi pronunciation. Your natural accent carries over, so it sounds like you speaking Hindi.

Yes. Pāṇini reads mixed-language text such as Hinglish naturally, in one voice, and that includes your clone. Type Hinglish in Roman letters, in Devanagari or in a mix, and listen once before you publish, especially for brand names.

Yes. Every free account includes one voice clone and 10,000 free text-to-speech characters, with no card required. Making the clone costs nothing; reading a script with it uses characters the same way any voice does. To try a different recording, delete the clone in My voices and add a new one.

About 10 seconds. The dashboard asks for a clear recording of 10 to 30 seconds in WAV, MP3, OGG or M4A. Keep it to one speaker, with no music and as little background noise as you can.

Only with that person's consent. Before a clone is created, the dashboard asks you to confirm the recording is your own voice or that the speaker has given you explicit permission, and our terms say the same. You are responsible for everything the clone says, in Hindi or any other language.

No. Our terms do not allow cloning or imitating the voice of a public figure or celebrity, and courts in India have restrained cloned voices of well-known actors and singers. Our article on the law on voice cloning in India explains the cases.

Yes. The dashboard works in a phone browser. Record the sample with your phone's voice recorder, then choose the file under Voices, Add voice. On an iPhone, save the Voice Memos recording to Files first so the file picker can see it.

Read more: the law on voice cloning in India and why a clone’s accent carries over.

Hear your own voice speaking Hindi

10,000 free text-to-speech characters and one free voice clone that speaks every language, no card required. Ten seconds of recording, then type any script.

Clone your voice freeMore for creators